Zu Produktinformationen springen
1 von 3

PMC Speakers

PMC 8-2

Normaler Preis €16.990,00
Normaler Preis Verkaufspreis €16.990,00
inkl. MwSt. Versand wird beim Checkout berechnet

PMC 8-2

This three-way active studio monitor is designed to provide critical reference monitoring for the most demanding applications.

Description

As with any PMC loudspeaker, thanks to its super-consistent dispersion and tonal balance, the PMC8-2 may be simply and seamlessly combined with smaller PMC speakers to create larger multi-channel or immersive systems.

The twin bass drivers are partnered with the same PMC55 mid-range tweeter, DSP system and four channels of 400W Class-D amplification used in the PMC6-2. Again, the speaker is configurable directly via the rear panel or using the browser-based SoundAlign™ software from a computer or tablet.

Together with the precisely tuned ATL™ cabinet and hexagonal Laminair™ vents, the PMC8-2 delivers phenomenal performance that approaches that of our Main reference monitors, with smooth and consistent bass response down to 25Hz, a revealing mid-range and wide, stable sound-staging. As with the rest of the range, the PMC8-2’s superb definition, fidelity, dynamics and bass accuracy allow mix decisions to be made quickly with complete confidence, and with no listening fatigue even after long sessions.

PMC8-2s can be upgraded through the addition of a PMC8-2 SUB to create an XBD system, enhancing the system’s bass headroom by 6dB. Dedicated short and taller floor-stands are available for the PMC8-2 and PMC8-2 XBD systems which position them on the ideal listening axis.

  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 113dB @1m (half space value calculated as +3dB from full space measurement.
  • Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC8-2 + PMC8-2 SUB creates PMC8-2 XBD, with up to 6dB of additional headroom
  • Optional dedicated floor stands for PMC8-2 (40”) and PMC8-2 XBD (19”)

Specifications

  • TypeActive 3-way nearfield reference monitor with ATL™ bass loading
  • Drive Unit Complement
    • LF 2 x PMC 200mm (8”) studio 8 drivers
    • MF PMC 55mm (2”) soft dome mid-range
    • HF PMC 27mm (1”) soft dome tweeter
  • Effective ATL™ Length3m (9.8ft)
  • Frequency Response25Hz - 25kHz (- 3dB) (@1m full space, on-axis)
  • Sensitivity+4dBu input signal = 98dB SPL @ 1m
  • Max continuous SPL113dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Max Peak SPL125dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • Directivity
    • H+/-45 degrees
    • V+/-50 degrees (-6dB off axis @10kHz)
  • Input
  • XLR switchable between analogue & digital AES3
  • Analogue input
    • +20/+24dBu max. input level (selectable)
    • 22K ohm input impedance
  • Digital input
    • 16/24-bit AES3 signal, left, right or left + right
    • 18 - 192kHz Sample Rate
    • 110 ohm input impedance
  • Expansion card slot For future connectivity upgrades
  • OutputXLR digital AES3 (fixed 24-bit @ 96kHz)
  • NetworkRJ45 for use with PMC SoundAlign web interface
  • Features
    • Level Trim (+/-10dB)
    • High-pass filter (20 - 200Hz, 12dB/Oct)
    • Delay (0 - 30mS)
    • Phase (normal or inverted)
    • LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
    • Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
    • User presets (3 + factory defaults)
  • Latency2.4mS
  • Amplifier power per channel
    • LF 2 x 400Wrms
    • MF 1 x 400Wrms
    • HF 1 x 400Wrms
  • Mains100 - 240VAC auto-switching, 50-60Hz (IEC C14)
  • Power consumption (idle)50W
  • Power consumption (max)1500W
  • Cabinet dimensions
    • H 534mm (21”)
    • W 551mm (21.7”)
    • D 440mm (17.3”)
  • Weight39kg (86lbs) each
  • Available FinishesStudio black